Home > EFM Ethernet First Mile. > Configuration Guide
Once the line has been ordered Pulsant will configure the line as follows:-
- Prior to the delivery of the LLU circuits by BT, Pulsant will send a EFM modem to site along with a straightforward install guide. Once BT have installed the circuits on our behalf, simply call our Managed Services team on 0845 11 99 999 to arrange activation of the service.
- If you have opted to take a Managed Firewall Router service, our support team at Pulsant will ensure that your IP address allocation meets your needs
- If have not opted for a managed service, you will be supplied with a routed subnet of 5 usable addresses but more can be added for no extra cost if there is justification by simply submitting a request to our support team via the my.pulsant.co.uk portal or by email – our service provisioning team will advise when the request will need to be made to ensure it is ready when your new EFM service is activated. Further allocations can be made at any time.
Your IT support will then be able to connect the services to your existing IT infrastructure.
For a typical EFM routing diagram please see this article.